Close
Close
DIN Standard Ketten
| Force Chain | Wire Diameter | Inner Length | Inside Width | Outside Width | Appr. | |||
|---|---|---|---|---|---|---|---|---|
| Articel No | Ø(dn) | Tolerance | t | Tolerance | b1 min. | b2 max. | Kg / Mtr | |
| FC.763.DG3.R.04.W | 4 | ± 0,20 | 32 | + 1,0 | - 1,0 | 7,2 | 16,8 | 0,27 |
| FC.763.DG3.R.05.W | 5 | ± 0,25 | 35 | + 1,1 | - 1,1 | 9,0 | 21,0 | 0,43 |
| FC.763.DG3.R.06.W | 6 | ± 0,30 | 42 | + 1,3 | - 1,3 | 10,8 | 25,2 | 0,63 |
| FC.763.DG3.R.07.W | 7 | ± 0,35 | 49 | + 1,5 | - 1,5 | 12,6 | 29,4 | 0,86 |
| FC.763.DG3.R.08.W | 8 | ± 0,40 | 52 | + 1,6 | - 1,6 | 14,4 | 33,6 | 1,10 |
| FC.763.DG3.R.10.W | 10 | ± 0,50 | 65 | + 2,0 | - 2,0 | 18,0 | 42,0 | 1,75 |
| FC.763.DG3.R.13.W | 13 | ± 0,65 | 82 | + 2,5 | - 2,5 | 23,4 | 54,6 | 2,95 |
| FC.763.DG3.R.16.W | 16 | ± 0,80 | 100 | + 3,0 | - 3,0 | 28,8 | 67,2 | 4,45 |
| Wire Diameter | Working Load Limit | Test Force | Breaking Load |
|---|---|---|---|
| Ø ( dn) mm | WLL ( Kg ) max. | MTF ( kN ) | BLL ( kN ) min. |
| 4,0 | 100 | 5,0 | 8,0 |
| 5,0 | 160 | 8,0 | 12,5 |
| 6,0 | 200 | 10,0 | 16,0 |
| 7,0 | 300 | 16,0 | 25,0 |
| 8,0 | 400 | 20,0 | 32,0 |
| 10,0 | 630 | 32,0 | 50,0 |
| 13,0 | 1000 | 50,0 | 80,0 |
| 16,0 | 1600 | 80,0 | 125,0 |
| Security Level | 1 / 2,5 / 6 | ||||||
| Working Load Limit ( WLL ) | 50 N / mm2 | ||||||
| Manufacture Test Force ( MTF ) | 125 N / mm2 | ||||||
| Breaking Load Limit ( BLL ) | 300 N / mm2 |