Close
Close
Landwirtschaft Program
Futterketten
| D ( mm ) | T ( mm ) | B ( mm ) |
|---|---|---|
| 4 | ± 0,16 | 12 |
| 5 | ± 0,20 | 15 |
| 6 | ± 0,24 | 18 |
| Wire Diameter | Working Load Limit | Test Force | Breaking Load | Bending Test | |||||
|---|---|---|---|---|---|---|---|---|---|
| Ø ( dn ) mm | WLL ( t ) | MTF ( kN ) | BLL ( kN ) min. | f ( mm ) min. | |||||
| 4 | 0,63 | 15,7 | 25,1 | 3,2 | |||||
| 5 | 1,00 | 24,5 | 39,3 | 4,0 | |||||
| 6 | 1,40 | 35,3 | 56,5 | 4,8 | |||||
| 7 | 1,90 | 48,1 | 77,0 | 5,6 | |||||
| 8 | 2,50 | 62,8 | 101,0 | 6,4 | |||||
| 10 | 4,00 | 98,1 | 157,0 | 8,0 | |||||
| 13 | 6,70 | 166,0 | 265,0 | 10,0 | |||||
| 16 | 10,00 | 251,0 | 402,0 | 13,0 |
| Maximum Weld Diameter ( mm ) | ( ds ) max. | 1,1 x dn | |||||||||
| Inner Length ( mm ) | ( tn ) | 3 x dn | |||||||||
| Minimum Inner Length ( mm ) | ( tmin ) | 2,91 x dn | |||||||||
| Maximum Inner Length ( mm ) | ( tmax ) | 3,09 x dn | |||||||||
| Minimum Inside Width ( mm ) | b1 | 1,3 x dn | |||||||||
| Maximum Outside Width (mm ) | b2 | 3,7 x dn |